Bay Networks Nautica RADIUS Reference Manual Download Page 27

Page: 27 / 130

EFERENCE

2-9

UALITY

ERVICE

[Click] the Quality Of Service button and access the Quality Of Service
menu.

Service Name

The name of the Specific Service (e.g. Gold,
Silver, Bronze etc.)

NAS

This is the IP Address of the NAS to which
the Quality Of Service applies.

PRIORITY

This will indicate either High, Medium, Low.

Note: If the NAS IP Address is set at 0.0.0.0, then it is part of a NAS Cluster

connected through a Nautica 8000LSU.

Note: Resources are allocated in accordance with this level of priority, i.e.

where Contention occurs Higher priority will be given first option on
any resources.

To Add an item to the Quality of Service [click] the ADD button and access
the GRADE OF SERVICE menu.

Summary of Contents for Nautica RADIUS



































































































































Search results

Summary of Contents for Nautica RADIUS

Reviews:

Related manuals for Nautica RADIUS

Brands by name

Popular brands

Bay Networks Nautica RADIUS, Reference Manual

Search results

Summary of Contents for Nautica RADIUS

Reviews:

Related manuals for Nautica RADIUS

Brands by name

Popular brands