Bay Networks Nautica RADIUS, Reference Manual, Page: 121 / 130

T
UTORIAL
3-55
35. Type SAVE<CR> at the Command Line prompt. The word SAVE will
disappear after a few seconds and the message “Please use the save
command” will also disappear.
The “Configure IP Routes Menu” should now be exactly the same as that
shown below.
No other changes to the CLAM’s configuration is required. Note however
that the “Configure IPX Route Menu” will only have one IPX Route initially,
the local IPX Network assigned in the LAN01 Path. However the number of
IPX Routes in this table will change on the establishment of a successful call
to the Marlin on the HQ Backbone Network. In actual fact three other Routes
should be added to this table when a call has been successfully established to
the Marlin on the HQ Backbone Network, as is shown below.