manualshive.com logo in svg

Bay Networks Nautica RADIUS, Reference Manual, Page: 41 / 130

Share
Download
Bay Networks Nautica RADIUS Reference Manual Download Page 41

R

EFERENCE

2-23

RIP O

PERATION

Select one of the options below:-

DISABLED

RIP is disabled.

SEND ONLY

The NAS (e.g. Marlin) broadcasts RIP tables,

but does not accept RIP broadcasts.

LISTEN ONLY

The NAS accepts RIP broadcasts but does no

transmit RIPs to the remote site.

SEND & LISTEN

The NAS both transmits and receives RIP

broadcasts.

Note: If RIP is disabled Static routes must be set up for each connection.

RIP T

YPE

RIP 1

Sets RIP 1 as the standard routing information
update protocol.

RIP 1 COMPATIBLE

Sets routing for RIP1 compatibility on the

interface, with  RIP 2 addressing on the
network.  This allows non standard subnet
information to be passed onto those devices
that can process it.

RIP 2

Sets the standard routing as RIP 2, allowing
the increased security of specific subnet
transmission to remote sites.

Summary of Contents for Nautica RADIUS



































































































































Reviews:

No comments