Baxi Senertec Dachs Pro 20 ST, Assembly And Operation Manual

Page: 51 / 118

14/4798.495.002 Installation | 51
Dachs Pro 20 ST
Mounting installation at the CHP
►
Lift the top rear cladding 3 as
illustrated and position the washer 4
on the frame component.
►
Lower the top rear cladding 3 and
align the cladding to the washer and
the frame component according to the
drilled hole.
►
Position the hinge pin 5 over the
drilled hole of the top rear cladding 3 .
►
Secure the hinge pin 5 with the
M12×80 cylinder screw 6 at the frame
component.
Torque:
20 Nm
Mounting installation at the MSR Pro 20 ST
To attach the MSR Pro 20 ST at the CHP, some
preparatory mounting steps have to be
performed. The required components are
provided as accessories.
►
Attach the mounting bracket 8 as
illustrated with the distance plate 7
using the 3 M8×20 RIPP screws and 3
M8 RIPP nuts at the controller housing.
►
Attach the hinge plate 9 as illustrated
using the 4 M6×20 RIPP screws at the
mounting bracket 8 .
6.2.3 Assembly of the MSR Pro 20 ST at
the CHP
Fig. 34: Mounting position of the MSR Pro 20 ST at the CHP
Fig. 35: Mounting at the MSR Pro 20 ST
Details - MSR Pro 20 ST controller
mounting at the CHP
Position of MSR Pro 20 ST controller
mounting at the CHP
Front view
3
3
2
1
4
4
6
7
8
9
5
1
Frame
2
Left cladding
3 Top, rear cladding
4 Washer for controller mounting
5
Hinge pin
6 M12×80 cylinder screw
Attention:
The RIPP screw connections of the
MSR Pro 20 ST mounting must be
applied
very tightly
to ensure
equipotential bonding for the
controller.
Background: painted
components!
!