14/4798.495.002
Introduction | 11
Dachs Pro 20 ST
1.5.3 Responsibilities of the manufacturer
Reference:
The declaration of conformity, certificates, approvals and manufacturer declarations on the Dachs Pro
20 ST can be found in the operator documentation folder or in the iav Documentation of VW.
Note:
The Dachs Pro 20 ST with its capacity is not subject to the German TI-air
(<1MW) and does therefore not require any authorisation. As is the case
for heating boilers of this size, there is no obligation of notification to the
responsible authorities. The specifications of the applicable building code
[Landesbauordnung in Germany] shall be authoritative.
i
Warranty:
Any warranty claim is subject to proper assembly as well as proper use/operation of the unit in accordance with applicable
SenerTec and VW instructions as well as regular maintenance by trained and authorised specialists only.
Disclaimer of warranty:
In particular for damage which cannot be directly or indirectly traced back to the manufacturer, for example:
●
Incorrect planning and assembly (e.g. fuel supply, hydraulic and electrical connections, exhaust gas evacuation).
●
Commissioning, maintenance and repair by buyers or third parties.
●
Natural wear and tear.
●
Incorrect, improper treatment, alteration, repair.
●
Unsuitable operating media, non-admitted lubricants.
An application with the corresponding DNO is mandatory in Germany, for example. The stipulation of the required cos φ is
communicated to the applicant by the DNO once the connection has been approved (VDE-AR-N 4105).
Our Dachs products with CE mark have been developed and manufactured in accordance with the EC directives applicable
at the time of inspection. This is confirmed by the manufacturer of the product in an EC declaration of conformity and by
labelling the product with the CE mark.
Devices subject to the EC gas appliances directive have been tested and certified by the accrediting inspection authority
indicated next to the CE mark by means of the respective ID number.
Subject to technical modifications.
The manufacturer will not assume any liability in the following cases:
●
In case of non-compliance with the operating instructions of the unit (SenerTec as well as VW documentation).
●
In case of insufficient maintenance and/or servicing of the unit.
●
In case of non-compliance with the installation instructions and requirements for the unit.
The majority of countries do not have harmonised EU directives and regulations for the installation and commissioning of
units in buildings. For this reason, when installing Dachs products, the responsible installation company has to adhere to the
national laws, regulations and standards of the respective country.
Summary of Contents for Senertec Dachs Pro 20 ST
Page 115: ...14 4798 495 002 Spare parts 115 Dachs Pro 20 ST Notes ...
Page 116: ...14 4798 495 002 116 Spare parts Dachs Pro 20 ST Notes ...
Page 117: ...14 4798 495 002 Spare parts 117 Dachs Pro 20 ST Notes ...
Page 118: ...Dachs Pro 20 ST Baxi Commercial Wood Lane Erdington Birmingham B24 9QP ...
