Baxi Senertec Dachs Pro 20 ST, Assembly And Operation Manual

Page: 13 / 118

14/4798.495.002 Safety | 13
Dachs Pro 20 ST
Note:
In order to integrate the CHP technology into the
buildings, standards/directives such as TRGI, TRF,
TRWI, VDI 2035 are to be observed.
i
2 Safety
2.1 General safety instructions
2.1.1 Structure of the general safety instructions
Danger
Danger symbols
Information on type and source of danger.
Explanation and indication of the consequences
of the risk.
• Information on avoiding the risk.
In case of emergency: Recommended
behaviour in case of emergency.
This chapter describes the general risks resulting from working with the Dachs Pro 20 ST as well as measures for preventing
hazardous situations and how to react in the event of an accident.
All work on the unit, such as assembly, commissioning, servicing and repair, may only be carried out by certifi ed and
authorised specialist staff .
The unit has been designed in accordance with the statutory regulations applicable at the time of delivery and incorporates
state-of-the-art safety technology. Any potential residual hazards are indicated by safety warnings and described in these
instructions.
Please note the safety warnings attached to the machine. The machine may only be operated if all safety equipment is in
place. Hazardous areas between the unit and equipment on site have to be secured. Regularly check all safety equipment,
warning systems and automatic shutdowns.
Before initial commissioning, the exhaust gas system including safety equipment (e.g. CO sensors) is to be inspected for
effi ciency by a specialist engineer. Before commissioning, the electrical connections are to be checked by a certifi ed specialist
engineer. After any alteration to the unit including modifi cations of electrical or hydraulic connections, the inspection has
to be repeated.
The safety warnings highlight special risks occurring when handling combined heat and power units. Such risks may occur
when operating a combustion engine (heat, moving parts, exhaust gas, noise) in connection with electrical equipment
(danger of electrocution).
Reference:
Please particularly observe standards, guidelines, regulations and legal requirements
additionally specifi ed in the iav documentation relevant for planning and installation.
Reference:
Please particularly observe the safety requirements and contents of the iav Documentation of VW.