Baxi Senertec Dachs Pro 20 ST, Assembly And Operation Manual

Page: 103 / 118

14/4798.495.002 Operation | 103
Dachs Pro 20 ST
Reference:
For the detailed description of the CHP unit control panel, please refer to the iav documentation of VW.
●
EcoBlue 2.0 (Generation 1.2) installation manual for Dachs Pro 20 ST , art. no. 4798.522.xxx.
●
EcoBlue 2.0 (Generation 1.2) user manual for Dachs Pro 20 ST , art. no. 4798.530.xxx.
1. Switch on the MSR Pro 20 ST at the main switch.
2. Switch on the CHP unit at the main switch.
3. Press the
ON/OFF
key to set the MSR Pro 20 ST to
automatic mode
(top LED flashing).
●
The Dachs Pro 20 ST is now operational.
8.3 Start-up
8.4 Shutdown
1. Press the
ON
/
OFF
key to set the Dachs to
STOP
(bottom LED flashing).
2. Switch off the CHP unit at the main switch.
3. Switch off the MSR Pro 20 ST at the main switch.
For systems in which temperatures of less than +5 °C might occur, the overall system must be protected from frost at all times.
This can be done by taking suitable measures during installation like filling glycol into the heating system or by providing
appropriate heating.
8.5 Frost protection
Attention:
For facilities that are not operated throughout the whole year, frost protection has to be
considered in detail. The required measures should be clarified between operator and
installer when planning the unit.
!
Reference:
For shutdown, please observe the supplementary instructions and information in
the iav Documentation of VW on the EcoBlue 2.0 (Generation 1.2) in particular.