Baxi Senertec Dachs Pro 20 ST, Assembly And Operation Manual

Page: 46 / 118

14/4798.495.002 46 | Prior to installation
Dachs Pro 20 ST
Note:
For positioning of the CHP unit at the installation location, the provided template is
to be used to ensure compliance with all clearance requirements including cladding
requirements.
i
Reference:
Please observe the instructions and information in the iav Documentation of VW on
the EcoBlue 2.0 (Generation 1.2) in particular.
5.4.3 SE940 buffer vessel transport to the installation location
●
The SE940 buffer vessel is only to be transported in its transport packaging.
●
Do not remove the transportation packaging before having reached the installation location.
●
Ensure that the buffer vessels are secured at the means of transportation at all times during transportation.
One buffer vessel weighs approx. 170 kg (without insulation). When transporting the buffer vessel to the installation location,
suitable lifting aids are required. When planning the transportation to the installation location, the external dimensions are
to be taken into consideration.
5.5 Unpacking and preparations
►
Inspect the packaging units for transport damage and check the scope of delivery with the packaging list
provided.
►
Unpack the assemblies/parts of the packaging units and position them at the installation location.
►
Remove the fixtures of the SE940 buffer vessels at the transport pallet.
►
Dispose of the packaging material in an environmentally friendly manner according to the applicable law on
recycling and waste management (KrW-/AbfG in Germany).
CHP unit alignment and positioning