29
10.0
Annual Servicing - Page 28
10.2 Preparation
1. For reasons of safety and economy it is important to
service the fire annually.
WARNING: Isolate the gas and electrical supplies to the
appliance before servicing.
2. Remove the controls access door and fender assembly
(Fig. 46).
3. Remove the trim (Fig. 46).
4. Carefully remove all the loose coals, and the front and
rear coal mouldings (Fig. 47).
5. Undo the gas supply at the disconnecting union. If
necessary remove any pipework between the union and inlet
elbow (Fig. 48).
6. Undo the three screws retaining the burner and controls
to the combustion box sides and combustion box base.
Withdraw the burner and controls from the fire (Fig. 49).
Summary of Contents for Belmont 2
Page 7: ...7 ...
Page 11: ...11 4 0 Electrical Page 10 4 2 Schematic Wiring Diagram ...
