32
11.0 Changing Components - Page 31
11.1 Changing Components
WARNING: Isolate the gas and electrical supplies to the
appliance before changing any components.
1. Remove the controls access door and fender assembly
(Fig 59).
2. Carefully remove all the loose coals and the front and
rear coal mouldings.
CAUTION: The coals are extremely fragile and must be
handled accordingly. To avoid soiling ones hands,
gloves should be worn and any inhalation of the dust
should be avoided. Keep the coals away from children at
all times. Never use coals other than those supplied or
Genuine Baxi Spare Parts. Never put additional coals on
the fire. Please read section 1.2 Important Information
NOTE: After changing any components carry out checks
for gas soundness
1. Pull and lift the trim away from the fire outer frame. It is
attatched by the keyways in the inside edge of the trim.
Summary of Contents for Belmont 2
Page 7: ...7 ...
Page 11: ...11 4 0 Electrical Page 10 4 2 Schematic Wiring Diagram ...
