27
9.0
Fitting the Trim & Fender - Page 26
9.1 Fitting the Trim and Fender
(Fig. 45)
1. Carefully remove the trim and fender from their
packaging.
2. Align the trim with the fire outer frame. The trim has four
keyhole type cutouts on the inside edge which locate on the
tabs on the black side trims.
3. Place the fender assembly centrally between the legs of
the trim and push it back as far as possible.
4. In a similar manner place the controls access door
centrally in the fender opening and push back as far as
possible.
9.2 Informing the User
1. These instructions and the Users Operating Instructions
should be handed to the customer. At the same time the
customer should be shown how to operate the fire safely and
efficiently.
2. The need for annual servicing should be emphasised and
the returning of the guarantee card advised.
Summary of Contents for Belmont 2
Page 7: ...7 ...
Page 11: ...11 4 0 Electrical Page 10 4 2 Schematic Wiring Diagram ...
