1
Majestic • Upgrade Kit Installation Instructions • 2614-930 Rev. D • 3/19
Ember Lighting & Refractory Upgrade Kit
SKUs: MARQ36-UPK, MARQ42-UPK, BASEMQ36TB-B, BASEMQ36HB-B,
BASEMQ36GL-B, BASEMQ42TB-B, BASEMQ42HB-B, BASEMQ42GL-B
MODELS: MARQ36IN, MARQ42IN
Installation Instructions
CAUTION! Risk of Cuts or Abrasions.
Wear protective
gloves and safety glasses during installation.
Leave this manual with party responsible for use and
operation.
NOTICE: Handle refractory panels with care. Refractory
may chip or crack if dropped or impacted.
SPECIAL TOOLS
Phillips screwdriver bit
Screw gun equipped with 1/4 in. driver bit
UPGRADE KIT COMPONENTS
(1) Refractory Base Kit
(1) LED Tub Assembly
(1) Bag of Teco-Sil
(1) Rear Light Cover
Figure 1 Glass Clip Tool
INSTALLATION
1. Remove decorative front from appliance and set it aside
in a safe place where it will not get damaged.
2. Use Glass Clip Tool (that was supplied with the ap-
pliance) as shown in Figure 1 to unhook the four (4)
glass slips along the bottom and the one (1) glass clip
on each side of the glass assembly. Set the glass
assembly aside in a safe place where it will not get
damaged.
3. Remove Logs.
Figure 2 View inside the appliance after glass assembly has been
removed
Figure 3 Logs removed from appliance
4. Remove lava rock.
Figure 4 Lava Rock removed from appliance
