3 Technical specifications
3.1
Homologations
3.1.1
Directives
This product complies with the requirements of the following European
Directives and Standards:
Pressure Equipment Directive 2014/68/EU
Low Voltage Directive 2014/35/EU
Generic standard: EN 60335-1
Relevant standards: EN 60335-2-40, EN 60335-2-21
Electromagnetic Compatibility Directive 2014/30/EU
Generic standards: EN 61000-6-3, EN 61000-6-1
Relevant Standard: EN 55014
This product complies with the requirements of European Directive
2009/125/EC on the ecodesign of energy-related products.
This product complies with the MCS and HARP certifications.
In addition to the legal requirements and guidelines, the supplementary
guidelines in this manual must also be followed.
Supplements or subsequent regulations and guidelines that are valid at
the time of installation shall apply to all regulations and guidelines
specified in this manual.
3.1.2
EC Declaration of Conformity
The unit complies with the standard type described in the EC declaration
of conformity. It has been manufactured and put into circulation in
accordance with the requirements of the European Directives.
The original declaration of conformity is available from the manufacturer.
3.1.3
Factory test
Before leaving the factory, each indoor unit is tested on the following
points:
Tightness of the heating circuit
Electrical safety
Tightness of the refrigerant circuit
3.2
Technical data
3.2.1
Compatible heating devices
Tab.2
Outdoor unit
Associated/compatible indoor units
AWHP 4.5 MR
Assure AWHP-IDU 4–8 E
AWHP 6 MR-3
Assure AWHP-IDU 4–8 E
AWHP 8 MR-2
Assure AWHP-IDU 4–8 E
3.2.2
Heat pump
The specifications are valid for a new appliance with clean heat
exchangers.
Maximum operating pressure: 0.3 MPa (3 bar)
3 Technical specifications
7762758 - v05 - 19082020
11
