Icon
Information
Description of the icon
DHW tank
Temperature display for the domestic hot water
Outdoor temperature
Outdoor temperature display
8.2
Starting and stopping the heat pump
8.2.1
Starting the heat pump
1. Switch on the outdoor unit and the indoor module.
2. Start up the heat pump by pressing the on/off switch.
3. Confirm the selection by pressing the settings button.
The heat pump begins an automatic venting cycle that lasts around
3 minutes and is repeated each time the power is cut. If there is a
problem, an error message is displayed on the home screen.
4. Check the hydraulic pressure in the installation indicated on the user
interface.
Important
Recommended hydraulic pressure between 0.15 and 0.2
MPa (1.5 and 2.0 bar).
8.2.2
Shutting down the heat pump
The heat pump must be shut down in certain situations, for example
during any intervention on the equipment. In other situations, such as an
extended absence period, we recommend that the Holiday operating
mode is used in order to benefit from the heat pump anti-blocking function
and to protect the installation from frost.
To shut down the heat pump:
1. Switch off the indoor module by pressing the on/off switch.
2. Cut the power to the indoor module, outdoor unit and back-up circuit
breakers.
8 Operation
7762758 - v05 - 19082020
57
