background image

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

Please read and save these instructions. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by
observing all safety information. Failure to comply with instructions could result in
personal injury and/or property damage! Retain instructions for future reference.

Description

A sewage pump is intended for use in
domestic sewage lift stations. It is suitable
for pumping sewage, effluent, wastewater,
groundwater, and other nonexplosive,
noncorrosive liquids with up to 2 inch solids. 

An acceptable 
motor control

device must be provided at time of
installation.

Unpacking

Inspect this unit before it is used.
Occasionally, products are damaged during
shipment. If the pump or components are
damaged, return the unit to the place of
purchase for replacement. Failure to do so
could result in serious injury or death.

Safety Guidelines

This manual contains information that is
very important to know and understand.
This information is provided for SAFETY and
to PREVENT EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols. 

Danger indicates 
an imminently

hazardous situation which, if not avoided,
will result in death or serious injury.

Warning indicates 
a potentially

hazardous situation which, if not avoided,
could result in death or serious injury.

Models BEF50M, BEF50T, BEF50T-2, 

Operating Instructions and Parts Manual

BEF75M, BEF75T,  and BEF75T-2

331202-002  1/07

Caution indicates a 
potentially

hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.

Notice indicates 

important

information, that if not followed, may
cause damage to equipment.

General Safety Information

1. Know the pump application, limitations,

and po ten tial hazards.

Do not use to pump
flammable or explosive
fluids such as gasoline, fuel
oil, kerosene, etc. Do not
use in flammable and/or explosive
atmospheres. Use pump only with
liquids compatible with pump
component materials. Failure to follow
this warning can result in personal
injury and/or property damage.

2. Make certain that the power source

(electric motor) conforms to the
requirements of the equipment.

Disconnect power before
servicing. If the power dis -
con nect is out of sight, lock
in the open po si tion and
tag it to prevent unexpected

application of power. Failure to do so
could result in fatal electrical shock!

3. Release all pressure within the system

before ser vic ing any component.

4. Drain all liquids from the system before

servicing.

5. Secure the discharge line before starting

the pump. An unsecured discharge line
will whip, possibly causing personal
injury and/or property damage.

6. Check hoses for weak and worn

condition before each use, making
certain that all connections are secure.

7. Periodically inspect the pump and

system com po nents. Perform routine
maintenance as required (See
Maintenance Section).

8. Provide a means of pressure relief for

pumps whose discharge line can be shut-
off or obstructed.

9. Personal Safety:

a. Wear safety glasses at all times when

working with pumps.

b. Keep work area clean, uncluttered

and properly lighted; replace all
unused tools and equipment.

c. Keep visitors a safe distance from the

work area. Make workshop child-
proof with pad locks, master switch es,
and by re mov ing starter keys.

10. When wiring an elec tri cal ly driven pump

such as this, fol low all electrical and safety
codes, as well as the most recent National
Electrical Code (NEC) and the Oc cu pa tion -

© 2007 Blue Angel™ Pumps

Specifications

Power supply requirements.............120V, 60 hz

Circuit requirements ........................15 amps (min)

Motor duty .......................................Intermittent

Motor ................................................120V, 1 Phase

Horsepower  .....................................1/2 (BEF50), 3/4 (BEF75)

Motor full load .................................11.2A (BEF50), 11.8A (BEF75)

Liquid temperature range ...............40°F to 120°F

Dimensions .......................................14” x 12”

Intake ................................................2”

Discharge ..........................................2” NPT female

Power cord........................................16 gauge 3 conductor w/ 

plug

Construction

Motor body material ..............................................................Cold rolled steel
Motor housing ........................................................................Cast iron
Volute ......................................................................................Cast iron
Impeller ...................................................................................Cast iron
Seal plate.................................................................................Cast iron
Shaft seal .................................................................................Mechanical

GALLONS PER MINUTE AT TOTAL HEAD IN FEET

Model

0’

5’

10’

15’

20’

25’

BEF50

137

125

100

67

33

BEF75

147

136

118

82

48

12

Performance

Sewage Pump

For parts, product & service information

visit 

www.blueangelpumps.com

Summary of Contents for BEF50M

Page 1: ...ds compatible with pump component materials Failure to follow this warning can result in personal injury and or property damage 2 Make certain that the power source electric motor conforms to the requirements of the equipment Disconnect power before servicing If the power dis connect is out of sight lock in the open position and tag it to prevent unexpected application of power Failure to do so co...

Page 2: ...g wall receptacle is encountered it must be replaced with a properly grounded 3 prong receptacle installed in accordance with the NEC and local codes and ordinances 12 All wiring should be performed by a qualified electrician 13 Always connect this product to a grounded outlet equipped with a Ground Fault Circuit Interrupter GFCI 2 Operating Instructions and Parts Manual Installation In any instal...

Page 3: ...anty For three years from the date of purchase Blue Angel will repair or replace at its option for the original purchaser any part or parts of its Sump Pumps or Water Pumps Product found upon examination by Blue Angel to be defective in materials or workmanship Please call Blue Angel 888 636 6628 for instructions or see your dealer Be prepared to provide the model number when exercising this warra...

Page 4: ...or proper installation and free operation 4 Recheck all sizing calculations to determine proper pump size 1 Pump should not be used for water above 120 2 Replace switch or reposition pump Pump may start unexpectedly Disconnect power supply before servicing 3 If voltage is under recommended minimum check wiring size from the main switch on property If OK contact power company 1 Return for service o...

Reviews: