Baxall Pyramid 2, Installation And Operating Instructions Manual

Page: 31 / 72

Page 31
Installation and Operating Instructions Pyramid 2 Keyboard
HDR CONTROLS
HDR Search Control Screen
The HDR Search Control screen is accessed by pressing the Search Control soft-key, which is located in both the HDR
Main screen and the HDR Controls screen. It is used to search through the events that have been recorded to hard disk.
VCR / MUX Operator Operator Setup
Camera Monitor
HDR
1 1
1
12... 12...
Figure 44 - HDR Search Control Screen
This screen has been designed to include all the functions that are used to operate the advanced search facility of the Vista
Columbus HDR. For this reason, some of the soft-keys work exclusive with the Vista Columbus Search dialog, which is
displayed on screen when the Search Control soft-key is pressed.
See the following table for information about the soft-keys in the HDR Search Control screen:
Icon Description
Figure 45 - HDR Search Control Screen Soft-keys
Move to the screen. HDR Main
Move to the screen. HDR Controls
When the Vista Columbus Search dialog is displayed on a monitor, use this soft-key to
enter the highlighted block of fields, Once in the block, move the joystick left and right
to move between fields, and move the joystick up and down to change field values. Press
the
soft-key again to confirm values and selections. Enter
Press a number key followed by this soft-key to recall a macro function (e.g., adjust screen
configuration, recall multiple presets etc). New macros cannot be produced using the
keyboard, as the macros are programmed and stored on the HDR itself.
Press a number key followed by this soft-key to instruct the HDR to begin a sequence.
The keyboard has no control over the sequence itself (e.g., the camera order, dwell time
etc) as it was programmed and stored on the HDR itself.
When the Vista Columbus Search dialog is displayed on a monitor, use this soft-key to
move to the previous block of fields.
When the Vista Columbus Search dialog is displayed on a monitor, use this soft-key to
move to the next block of fields.
When the Vista Columbus Search dialog is displayed on a monitor, use this soft-key to
leave a block of fields without making any changes.