Evaluating a parallel measurement or Full MWT
PD-TaD 62
90 / 114
822-187-3
No.
Element
Function
4
Project Data
area
This comprises the details on the project such as log name, the
company and the cable route. The log name is taken from the
measurement file.
If you wish to change the log name, enter a new name.
Enter the company data and the cable route.
5
Cable Data
area
This comprises the details on the cable route. The data are taken
from the measurement file.
If necessary, amend the details.
6
Summary of the measurement
results per phase
This applies to the MWT measurement and the dissipation factor
measurement
7
Ramp-up trace
The log shows the curve of the respective measurement or test. The
sample log (MWT measurement) shows the ramp-up curve.
The test curve is shown in the logs of the VLF test.
8
Measurement results of the
ramp-up stage for each phase
This applies to the MWT measurement and the dissipation factor
measurement
In VLF test logs the measurement results per voltage step and phase
are shown.
9
Threshold values for the ramp-
up stage
This applies to the MWT measurement and the dissipation factor
measurement
10
MWT trace
This only applies to the MWT measurement
11
Threshold values for the MWT
phase
This only applies to the MWT measurement
13.2.4 Before first use
The USB drive supplied contains the
BAUR-DiagnosticReporter.xlsm
file
.
If this file has not yet been saved to your computer, do this now.
Summary of Contents for PD-TaD 62
Page 26: ...Technical data PD TaD 62 26 114 822 187 3 4 TECHNICAL DATA ...
Page 113: ......