Baur PD-TaD 62 User Manual Download Page 87 | Manualshive

Page: 87 / 114

Baur PD-TaD 62 User Manual Download Page 87

PD-TaD 62

Evaluating a parallel measurement or Full MWT

822-187-3

87 / 114

e. Select

Save

menu item.

The log is saved to the USB drive.

f.

Acknowledge this save confirmation by pressing

OK

.

13.2 Using Diagnostic Reporter to edit logs of the dissipation

factor and MWT measurements

Diagnostic Reporter is an Excel-based application. This application can be used to open, edit
and save the exported test and measurement logs in the various formats available in Excel
(such as e.g. PDF file, txt file or html file).

System requirements

Software

Version

Firmware PD-TaD 62

from version 2.0

MS Excel

from version 2007

13.2.1 Settings for MS Excel 2010 under Windows 10

If the Diagnostic Reporter is installed on a PC with Windows 10 and MS Excel 2010, a
decimal point must be defined as the thousands separator in the Excel options.

1. Open MS Excel 2010.

2. Open the Excel options by selecting the

Options

button ( ) in the

File

tab.

The

Excel options

window opens.

3. In the Excel options, open the

Advanced

tab.

4. Disable the

Use system separators

checkbox.

The

Decimal separator

and

Thousands separator

input fields become active.

5. Enter a decimal point in the

Thousands separator

input field.

6. Confirm the change by pressing

OK

.

«
...
85
86
87
88
89
...
»

Summary of Contents for PD-TaD 62



















































































































Reviews:

No comments