Baumuller B MaXX 4000 Series Instruction Handbook Manual Download Page 53

Page: 53 / 76

of 74

Instruction handbook

b maXX

(BM4-F-)DIO/FIO-XX (Digital IO module)

Document No. 5.01046.06

AINTENANCE

9.1

Safety notes

Basic information

9.2

Environmental condition

If the prescribed environmental conditions are adhered to, then the device is mainte-
nance-free. For the prescribed environmental conditions see Instruction handbook

b maXX

4000

The most important prescribed environmental conditions are:

Dust-free environmental air

Temperature: Min.

5 °C to max. +55 °C

Relative humidity:

5% to 85%, no condensation

Installation altitude: From 1000 m and higher derating

WARNING!

Risk of injury due to improperly performed maintenance work!

Improper maintenance can lead to severe personal injury and material damage.

Therefore:

Before beginning work, make sure that there is enough space for mounting.

Make sure that the mounting area is kept clean and orderly. Parts and tools that
are loosely stacked or lying around are a potential accident source.

Summary of Contents for B MaXX 4000 Series













































































Search results

Summary of Contents for B MaXX 4000 Series

Reviews:

Related manuals for B MaXX 4000 Series

Brands by name

Popular brands

Baumuller B MaXX 4000 Series, Instruction Handbook Manual

Search results

Summary of Contents for B MaXX 4000 Series

Reviews:

Related manuals for B MaXX 4000 Series

Brands by name

Popular brands