Baumuller B MaXX 4000 Series Instruction Handbook Manual Download Page 15

Page: 15 / 76

Safety

Instruction handbook

b maXX

(BM4-F-)DIO/FIO-XX (Digital IO module)

Document No. 5.01046.06

of 74

Moving

components

2.7

Fire fighting

WARNING!

Risk of injury from moving components!

Rotating components and/or components moving linearly can result in severe injury.

Therefore:

Do not touch moving components during operation.

Do not open any covering during operation.

The amount of residual mechanical energy depends on the application. Powered
components still turn/move for a certain length of time even after the power supply
has been switched off. Ensure that adequate safety measures are taken.

DANGER!

Risk of fatal injury from electrical current!

There is a risk of electric shock if an electrically-conductive, fire-extinguishing agent
is used.

Therefore:

Use the following fire-extinguishing agent:

ABC powder / CO

Summary of Contents for B MaXX 4000 Series













































































Search results

Summary of Contents for B MaXX 4000 Series

Reviews:

Related manuals for B MaXX 4000 Series

Brands by name

Popular brands

Baumuller B MaXX 4000 Series, Instruction Handbook Manual

Search results

Summary of Contents for B MaXX 4000 Series

Reviews:

Related manuals for B MaXX 4000 Series

Brands by name

Popular brands