PCD41
www.baumer.com
37
Line 46
Tare function via
key
0 * without Tare function
1 with Tare function
Line 51
Baud rate
0 * 4800 baud
1 2400 baud
2 1200 baud
3 600 baud
Line 52
Parity
0 * even
1 odd
2 no
Line 53
Stop bits
0 * 1
1 2
Line 54
Address
* from 0 to 99
Line 55
Assignment output value via interface (line 31 or 32=4)
0 * F
1 HIGH
Line 56
RS422: control contacts T+ and/or T-
0 * switched in sense of transmission when sending, in sende of
reception when receiving
1 always in sense of transmission
The dash line signalizes the end of the third programming ield.
Turn off programming
Press key.
●
The instrument then switches back to the operating mode.
Reset to factory setting
Turn on instrument and simultaneously press the keys
and
.
All values already programmed are set back to factory setting.
„ClrPro“ is then displayed.
