Baum VarioUltra 20, User Manual, Page: 92 / 154

92
2. Open the command menu (S3) and select menu item File >
Delete.
3. A dialog will open with a security question and a message about
the number of files in the folder and/or the file size. Select the
“Yes” option to confirm the deletion.
4. Deletion of multiple files or folders at one time is also possible.
Please refer to the Edit Menu section elsewhere in this manual for
instructions on highlighting multiple files/folders.
The shortcut command B9+B7 can also be used to open the Delete
dialog.
Note: If you receive a message that a file or folder cannot be deleted, it
may be because it contains files with activated attributes that make the
file(s) hidden or read-only. Please refer to the “Properties” section below
for instructions on changing these attributes.
9.7 Rename a File or Folder
Changing the name of a file or folder is simple.
Here are the step-by-step instructions to rename a file or folder:
1. In the file list, use the Navistick to move to the file or folder you
wish to rename.
2. Open the command menu (S3) and select menu item File >
Rename.
3. A dialog will open with an edit box, which contains the name of the
file or folder you wish to rename.
4. Enter the new name, being careful not to change the extension in
the case of files. Select OK to confirm the change.
9.8 Create a New Blank Document
A blank document can be created as either a regular text-based file
(RTF, TXT), or as a Braille Ready Format (BRF) file. The default setting
is BRF.
** New ** with v1.4: new documents can only be created within the
word processor application.
Before creating a blank document, you should decide which option you
prefer: the default BRF, or RTF. Note that VarioUltra remembers your
choice so creating a new blank document in future will skip these steps
unless you wish to change the file format.