Baum VarioUltra 20, User Manual, Page: 101 / 154

101
4. Flashing (Checkbox). Off by default, check the box to toggle
between a non-moving or a flashing cursor.
5. Flash Rate: Enter the flashrate in milliseconds. Enter a value
between 200 and 2000. Only appears if Flashing checkbox is
checked.
6. Ok. Select this option to save changes and exit to the Cursor
menu.
7. Cancel. Select this option to abort changes and exit to the Cursor
menu.
Edit Mode
Edit Mode applies whenever you open or create a document that is not
write-protected, and inside any edit box. Options you can change
include:
1. Cursor shape. Enter the dot pattern you prefer to read when a
cursor is displayed. Default is dots 7 and 8.
2. Inverted On/Off (Checkbox). When checked, the dot pattern
selected for the cursor will be inverted. If you selected dots 78 for
the cursor and then inverted it, dots 123456 would be shown
instead.
3. Flashing (Checkbox). Off by default, check the box to toggle
between a non-moving or a flashing cursor.
4. Flash Rate: Enter the flashrate in milliseconds. Enter a value
between 200 and 2000. Only appears if Flashing checkbox is
checked.
5. Ok. Select this option to save changes and exit to the Cursor
menu.
6. Cancel. Select this option to abort changes and exit to the Cursor
menu.
Grade 2
Reading Mode applies when working within a grade 2 file. Options you
can change include:
1. Cursor shape. Enter the dot pattern you prefer to read when a
cursor is displayed. Default is dot 7 and 8.
2. Inverted On/Off (Checkbox). When checked, the dot pattern
selected for the cursor will be inverted. If you selected dots 78 for
the cursor and then inverted it, dots 123456 would be shown
instead.
3. Flashing (Checkbox). Off by default, check the box to toggle
between a non-moving or a flashing cursor.