Baum VarioUltra 20, User Manual, Page: 33 / 154

33
5) On VarioUltra, immediately tap the left thumb key, B9 to accept the
pairing.
You’re all done! You may now switch to Braille Display mode on
VarioUltra and start using it with your iOS device. Please refer to the
Appendix section of this user manual for a list of iOS commands that can
be entered from VarioUltra.
2.5.6 VarioUltra with an iOS Device (Bluetooth, old method ).
If your VarioUltra is not yet updated to version 1.33, or if you simply
prefer to initiate Bluetooth pairing from the VarioUltra, here are the old
instructions. They work for any iOS device using iOS 8.3 or newer.
1) In VarioUltra Braille Notetaker, enter command B9+D1 to switch to
Computer Braille.
2) On your iOS device, go to Settings > Bluetooth, and make sure that
Bluetooth is on. Do not exit from Settings > Bluetooth or attempt to do
anything else on your iOS device.
3) With VarioUltra switched on and in Braille Notetaker mode, go to
Settings > Bluetooth and make sure the Bluetooth checkbox is
checked. If dots 1 and 4 are present in cell 6, the box is checked. If
the parentheses in cells 5 and 7 are separated by a blank cell, the
box is unchecked. If it’s not, tap the Navistick to the right or press the
cursor routing button about the empty checkbox to switch Bluetooth
on.
4) With Bluetooth on, navigate down a line to the ‘Scan’ option, and
select it by tapping the left thumb key, B9, or by pressing any cursor
routing button above the word ‘Scan’. This will command VarioUltra to
search for Bluetooth devices that are in range.
5) After scanning is complete, you will be presented with a horizontal list
of Bluetooth devices. The devices listed will include all Bluetooth
devices that are in range, plus Bluetooth devices that may have been
previously paired with your VarioUltra.
6) Use the Navistick to move right and left through this list until you find
your iOS device. When you do, navigate down a line with the
Navistick and choose the ‘Pair’ option to initiate the Bluetooth pairing.
7) Turn your attention back to your iOS device. If the pairing process
started, your iOS device should be prompting you to enter the 4-digit
pairing code, which is 1111.
8) Enter the code 1111, and if you’re using VoiceOver, swipe left to the
Pair button on your iOS device, and select it.