Bauknecht BVH 92 2B K, Instructions For Use Manual

Page: 55 / 160

56
shock.
The appliance must be handled and installed by two or more persons-risk of injury.
Keep children away from the instalaltion site.
Once installed,packaging waste (plastic,styrofoam parts etc.) must be stored out of reach of
children – risk of suffocation.
Very young children(0-3years)should be kept away from the appliance.Young children (3-8
years)should be kept away from the appliance unless continuously supervised.
This appliance is not for professional use. Do not use the appliance outdoors.
Strictly observe the instructions in this manual. No liability will be assumed for any
problems, damage or fires caused by failure to comply with the instructions in this manual.
The device is intended for domestic use only, to cook food and extract the fumes generated
by cooking. No other use is allowed (e.g. heating rooms). The manufacturer declines any
liability for inappropriate use or incorrect setting of the controls.
The product may have different aesthetic features with respect to the illustrations in this handbook, however the operating,
maintenance and installation instructions remain the same.
! Read the instructions carefully: they contain important information on installation, operation and safety.
! Do not make electrical changes to the product.
! Before installing the device, check that none of the components are damaged. Otherwise, contact the dealer and do not continue with the
installation.
! Check the integrity of the product prior to its installation. Otherwise, contact the dealer and do not continue with the installation.
Note: The parts marked with the symbol "(*)" are optional accessories supplied only with some models or otherwise not supplied, but available
for purchase.
INSTALLATION
The electrical and mechanical installation must be performed by qualified personnel.
The electrical appliance is designed to be built-in to a 2-6 cm thick worktop in the case of TOP installations; 2.5-6 cm in the case of FLUSH
installations.
The minimum clearance between the cooktop and wall must be at least 5 cm at the front, at least 4 cm on the side and at least 50 cm with
respect to the wall units above.
NB = The suggested clearances are indicative: when designing the spaces, follow the instructions of the kitchen manufacturer.
TOP installation: (fig.1a); FLUSH installation:(fig.1b)
MOUNTING
Before starting the installation:
• After unpacking the product, check that it has not been damaged during transport and in the case of problems, contact your
dealer or Customer Service, before proceeding with the installation.
•
Check that the product is the right size for the installation location.
•
Check for accessories inside the packaging (placed there for ease of transport) such as bags containing screws, the warranty card, etc..
Remove them and keep them safe.
• Also check that there is a power socket near the installation area
Preparing the cabinet for installation:
- The product cannot be installed above cooling appliances, dishwashers, heaters, ovens, washing machines and dryers.
- Cut the cabinet before inserting the hob and carefully remove shavings or sawdust.
- to optimise the filter installation, it is advisable to cut a slot in the plinth to insert a grille (available on the market)
IMPORTANT: use a single component adhesive sealant (S) , resistant against high temperatures up to 250°;
prior to installation, the surfaces that need to be glued must be carefully cleaned, removing all substances that may compromise
adhesion
(e.g. release agents, preservatives, grease, oils, powders, old adhesive residue, etc.);
the sealant must be evenly distributed along the entire perimeter of the frame;
after gluing, leave to dry for approximately 24 hours.