Bauknecht BVH 92 2B K, Instructions For Use Manual

Page: 60 / 160

61
Touch and slide with your fingers along the Selection bar (3)
(above the level ) and activate the Power Booster
The Power Booster level is indicated in the Selection / Display
area (2)
with the symbol” ”
Key Lock
The Key Lock allows cooktop settings to be blocked, thus
preventing accidental tampering, leaving set functions active.
Activation:
• press (10)
Repeat the operation to deactivate .
Note: if any other function is pressed during the active Key
Lock, the symbol , will flash to indicate that the function is
in use and must be deactivated if necessary in order to use
the hob.
Automatic Heat UP
The Automatic Heat UP function allows the set power to be
reached more quickly; with this function it is possible to cook
food faster without the risk of burning it, insofar as the
temperature does not exceed the set level.
This function is available for power levels 1-8 .
Activation:
• from the cooking zone on press (7)
• a flashing " " is shown in the Display (2) which alternates
with the power set in the cooking zone.
Increasing the power level of the cooking zone: the Automatic
Heat Up function remains active, with the new temperature
setting;
Decreasing the power level of the cooking zone: the
Automatic Heat function is deactivated.
Note: by selecting another cooking zone at the same time, the
symbol (7) will return to being illuminated with a slight
intensity light, and it will be possible to proceed, also for this
area, to activation of the function; the function remains active
in the area where it has already been set, as indicated in the
Display (2)
Temperature Manager (Warming Function)
Temperature Manager is a control function that allows the
maintaining of heat at a constant temperature, at an optimised
power level; ideal to keep ready-cooked foods warm. The
Temperature Manager function is activated the first time the
key is pressed
The symbol appears in the display (2) of the zone that is
working in the Temperature Manager
Note: by selecting another cooking zone at the same time, the
symbol (8) will return to being illuminated with a slight
intensity light, and it will be possible to proceed, also for this
area, to activation of the function; the function remains active
in the area where it has already been set, as indicated in the
Display
(2)
• Press (8) again to deactivate and switch off , until
bringing of the level shown in the Display (2) to “ ” .
Note: if there are several zones working in the Temperature
Manager (Warming Function), first select the desired zone
using the Selection zone (2) ;
the function can also be deactivated via the Selection Bar (3) ,
bringing the Power Level to “ ”.
Pause
The Pause function allows active functions on the cooktop to
be suspended, bringing the cooking power to zero.
Activation:
• press “ ” (9)
• a flashing “ ” is shown in the displays (2)
To deactivate the function:
• press (9)
the Selection Bar (3) lights up
• press/slide on the Selection Bar (3) to deactivate the
function
Note: deactivation restores the conditions of the hob before
the pause; the hob continues to work with the same settings
previously set.
Note: if after 10 minutes the Pause Function is not
deactivated, the hob switches off automatically.
Note: the Pause Function does not affect the extraction.
“STAND ALONE” Timer
The Timer function is a countdown independent of the cooking
zones (and the extraction zone).
The timer is activated by pressing the
Zone/Display (4)
Use the symbols (5) to set the duration of the
Timer ,which is displayed in the Zone/Display (4)
Note: wait 10 seconds without pressing any other command,
so that the countdown starts.
The format of the Timer is
.
- . for the times
- for the minutes
Note : the timer can be set up to a maximum of 1h and 59min.
In the Zone/Display (4) the remaining time will be displayed;
at the end of the countdown, an acoustic signal will sound
Note: in the display of the countdown, for a time less than 10
minutes, the following format is evident
-
. minutes
- seconds
with fixed light point
To switch off the Timer:
• select Zone/Display (4)
• set the duration of the Timer to , via (5)