Basler A102K, User Manual, Page: 99 / 133

Configuring the Camera
BASLER A102
k
4-21
DRAFT
Green Gain 1
Green Gain 2
Purpose: To adjust the gain for the green pixels in the lines that have green pixels and red pixels (the
odd lines).
Type: This is a read or write command.
Read Command: Cmd-ID R/W-Flag Data Length Data
0x8E 1 1 -
Response: Cmd-ID R/W-Flag Data Length Data
0x8E 0 1 1 Byte
Write Command: Cmd-ID R/W-Flag Data Length Data
0x8E 0 1 1 Byte
Response: None
Data Format: Byte 1 The setting for green gain 1.
Data Range: Green gain 1 settings can range from 0 (0x00) to 63 (0x3F).
A setting of 0 (0x00) will reduce the gain on the green pixels in the lines that
have green and red pixels by approximately 6 dB. A setting of 32 (0x20) will
result in no change in the gain on these green pixels. A setting of 63 (0x3F)
will increase the gain on these green pixels by approximately 6 dB.
Purpose: To adjust the gain for the green pixels in the lines that have green pixels and blue pixels
(the even lines).
Type: This is a read or write command.
Read Command: Cmd-ID R/W-Flag Data Length Data
0x8F 1 1 -
Response: Cmd-ID R/W-Flag Data Length Data
0x8F 0 1 1 Byte
Write Command: Cmd-ID R/W-Flag Data Length Data
0x8F 0 1 1 Byte
Response: None
Data Format: Byte 1 The setting for green gain 2.
Data Range: Green gain 2 settings can range from 0 (0x00) to 63 (0x3F).
A setting of 0 (0x00) will reduce the gain on the green pixels in the lines that
have green and blue pixels by approximately 6 dB. A setting of 32 (0x20) will
result in no change in the gain on these green pixels. A setting of 63 (0x3F)
will increase the gain on these green pixels by approximately 6 dB.