Configuring the Camera
BASLER A102
k
4-15
DRAFT
4.2.4.6 Area of Interest Starting Column
4.2.4.7 Area of Interest Width in Columns
Purpose:
To set the starting column for the area of interest or to read the current setting. See Section
for details on the area of interest.
Type:
This is a read or write command.
Read Command:
Cmd-ID
R/W-Flag
Data Length
Data
0xA9
1
2
-
Response:
Cmd-ID
R/W-Flag
Data Length
Data
0xA9
0
2
2 Bytes
Write Command:
Cmd-ID
R/W-Flag
Data Length
Data
0xA9
0
2
2 Bytes
Response:
None
Data Format:
Byte 1
Low byte of the starting column setting
Byte 2
High byte of the starting column setting
Data Range:
The starting column setting can range from 0 (0x0000) to 1391 (0x056F).
When you set column
n
using this command, the actual starting column will
be
n
+ 1. For example, if you set the starting column to 0 with this command,
the actual starting column = 0 + 1 = 1.
Purpose:
To set the width in columns for the area of interest or to read the current setting. See Section
for details on the area of interest.
Type:
This is a read or write command.
Read Command:
Cmd-ID
R/W-Flag
Data Length
Data
0xAB
1
2
-
Response:
Cmd-ID
R/W-Flag
Data Length
Data
0xAB
0
2
2 Bytes
Write Command:
Cmd-ID
R/W-Flag
Data Length
Data
0xAB
0
2
2 Bytes
Response:
None
Data Format:
Byte 1
Low byte of the width in columns setting
Byte 2
High byte of the width in columns setting
Data Range:
The width in columns setting can range from 1 (0x0001) to 1392 (0x0570).
L
See Section
for a list of guidelines which must be followed when entering the
settings for the area of interest.
Summary of Contents for A102K
