Basler A102K, User Manual, Page: 10 / 133

Introduction
1-2 BASLER A102
k
DRAFT
1.1 Document Applicability
This User’s Manual applies to
A102
k
cameras with a camera version ID number of 04.
Cameras with a lower or a higher ID number may have fewer features or have more features than
described in this manual. Features on cameras with a lower or a higher ID number may not
operate exactly as described in this manual.
An easy way to see the camera version ID number for an
A102
k
camera is by using the CCT+.
To see the camera version ID number:
1. Double click the CCT+ icon on your desktop or click Start
⇒
All Programs
⇒
Basler Vision
Technologies
⇒
CCT+
⇒
CCT+. The CCT+ window will open and the software will connect
to your camera.
2. Scroll down until you find
the “Camera Information”
group heading. If there is a
plus sign beside the
Camera Information group
heading, click on the plus
sign to show the list of
parameters in the group.
3. Find the parameter called
“Camera Version.” As
shown in Figure 1-1, the
last two numbers of this
parameter are the camera
version ID number.
1.2 Camera Models
The camera is available in a monochrome model (the
A102
k
) and a color model (the
A102
kc
).
Throughout the manual, the camera will be called the
A102
k
. Passages that are only valid for a
specific model will be so indicated.
L
You can also access the camera version ID number by using the Read Camera Ver-
sion query command. (See Section
4.2.5.5 for information on the Read Camera Ver-
sion query command and Section 4.2 for information on using binary commands.)
The camera
version
ID number
appears
here.
Figure 1-1: CCT+ Window