Basler A102K, User Manual, Page: 82 / 133

Configuring the Camera
4-4 BASLER A102
k
DRAFT
4.1.4 Configuration Tool Help
The CCT+ includes a complete on-line help file which explains how to change a setting or to copy
the Work Set to a User Set, to Copy a User Set or the Factory Set to the Work Set, or to set the
Startup Pointer. To access on-line help, press the F1 key whenever the configuration tool is active.
L
Keep in mind that the Work Set is stored in a volatile memory. Any changes you
make to the Work Set using the configuration tool will be lost when the camera is
switched off. To save changes you make to the Work Set, go to the Sets Tab and
save the modified Work Set into one of the camera’s 15 User Sets. The User Sets
are stored in non-volatile memory and will not be lost when the camera is switched
off (see Section
3.13 ).
Alternatively, you can also save the Work Set to the hard disk of your computer and
load it from hard disk.
If you want your changes to be loaded into the Work Set at the next power on, go to
the Sets Tab and set the Startup Pointer to the User Set where you saved your
changes.