background image

SubStation User Manual 

 

Page 19 

Warranty 

Baseline warrants to the original consumer purchaser that a new SubStation as well as the 12 and 

24 valve biCoders will be free from defects in material and workmanship for the standard five-year 

warranty period. The Baseline biSensor™ as well as 1, 2 and 4 valve biCoders will be free of defects 

in material and workmanship for a five-year warranty period. The start of the warranty period is 

the date of installation of the system or component. For replacement irrigation components, the 

warranty on the replacement component is the remainder of the warranty on the original 

component, or 90 days, whichever is longer. 

If you discover a defect, contact your Baseline product installer, or Baseline Inc. 

Baseline will, at its option, repair or replace the component at no charge to the customer, provided 

it is returned during the warranty period, with transportation charges prepaid, to Baseline Inc. in 

Boise, Idaho. Baseline will pay return shipping of its choice. SubStations and displays must be 

properly packaged in the original packaging or in Baseline approved packaging to obtain warranty 

service. 

For warranty service, contact Baseline at 1-866-294-5847 to obtain a "Return Material 

Authorization” (RMA) number. A copy of the receipt or a bill of sale bearing the appropriate 

Baseline serial number and model number may be required for warranty service. Warranty 

Exclusions: normal wear and tear, abuse, unreasonable use, mistreatment, or neglect. Damage 

caused during installation or incorrect installation, damage caused by modification or repair not 

made or authorized by Baseline whose Manufacturer’s Serial Number and/or Material Number 

label have been removed, torn or defaced, damage caused by use of non-Baseline packaging, 

damage caused by improper or improperly used packaging. 

THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, 

WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BASELINE SPECIFICALLY DISCLAIMS ANY 

AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR LIMITATION, WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND AGAINST INFRINGEMENT. No 

Baseline dealer, agent or employee is authorized to make any modification, extension or addition 

to this warranty. 

BASELINE IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL 

DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, 

INCLUDING BUT NOT LIMITED TO LOSS OF DATA, LOSS OF PROFITS, DOWNTIME, GOODWILL, 

DAMAGE OR REPLACEMENT OF EQUIPMENT AND PROPERTY. 

Some states do not allow the exclusion or limitation of incidental or consequential damages or 

exclusions of implied warranties, so the above limitations or exclusions may not apply to you. This 

warranty gives you specific legal rights, and you may have other rights that vary from state to state. 

A ten-year extended warranty will be available on the controller pending submission and approval 

of Baseline’s extended warranty application.   

 

 

Summary of Contents for SubStation

























Reviews: