SubStation User Manual
Page 10
Setting Up the Screen Display
You can adjust the brightness and contrast on the SubStation screen to provide better visibility in a
variety of lighting conditions and to accommodate a variety of viewing angles. You can also set a
time limit for the backlight to be turned off.
1.
Press the
System Setup
button. The System Setup menu displays.
2.
Press the
button to highlight the
Display Setup
option, and then press the
OK
button to
select it. The Display Setup screen displays.
3.
Press the
+
or
–
button to change the number in the
Screen Contrast
field. A lower number
indicates less contrast and a higher number indicates more contrast. To rapidly increase or
decrease the value, press and hold the
+
button or the
–
button.
4.
When the screen contrast appears to be suitable for the conditions, stop changing the
number.
5.
Press the
button to move to the
Brightness
field, and then press the
+
or
–
button to
change the number.
Note
: You cannot increase the value in the Brightness field greater than 100%.
6.
Press the
button to move to the
Timeout
field, and then press the
+
or
–
button to change
the number. This setting enables you to control how long the display remains illuminated
before it goes dark.
7.
Perform one of the following options:
To return to the
System Setup
screen, press the
BACK
button.
To return the controller to the Run menu, press the
RUN
button.
Clearing the Assigned Devices on the SubStation
This function will clear all assigned devices from the SubStation. We recommend that you use this
function only as directed by Baseline Support. After you clear the assigned devices, you must go to
the BaseStation 3200 controller to reassign them.
1.
Press the
Setup
button. The System Setup menu displays.
2.
Press the
button to highlight the
Clear Programming
option, and then press the
OK
button
to select it. The Clear Programming screen displays.
3.
To clear all assigned devices, press the
+
button.
Note
: To exit this screen without clearing all assigned devices from the SubStation, press the
BACK button.
