SubStation User Manual
Page 3
Viewing the Controller Status Report
When the SubStation is in the RUN menu, the
Controller Status report typically displays on the
screen.
If you do not see “CONTROLLER STATUS” at the top
of the screen, press the
RUN
button to make sure
that the controller is in the RUN menu, and then
press the
BACK
button to display the Status Report
menu. Select the Controller Status option from the
menu.
Understanding Controller Status Information
When the SubStation is connected to the network and to a BaseStation 3200 irrigation controller,
the Controller Status screen shows the details of the connection.
•
Status
– Indicates whether the SubStation is connected to the BaseStation 3200 irrigation
controller
•
Controller IP
– Shows the Internet Protocol address (IP address) of the connected BaseStation
3200 irrigation controller
•
Connect Time
– Shows the date and time when the connection between the SubStation and
the BaseStation 3200 was established
•
MAC
– Shows the Media Access Control address (MAC address), which is a unique identifier
for BaseStation 3200’s network connection
•
Serial Number
– Shows the serial number of the BaseStation 3200
•
Data (In/Out)
– Shows the amount of data in KB that has been transferred between the
SubStation and the BaseStation 3200
Viewing Device Status Reports
The SubStation displays the serial numbers and status of all connected devices.
1.
Press the
RUN
button to make sure that the controller is in the RUN menu.
2.
Press the
BACK
button to display the Status
Report menu.
3.
Press the
button to highlight the specific
type of device that you want to see the status
report for, and then press the
OK
button. The
status report displays.
