Bartscher 400M, Instruction Manual

Page: 57 / 184

- 55 -
d) Press the "C" button (2G). The device performs the vacuum packing cycle and
switches off automatically when it is over. The pump switches off automatically after
approximately 5 minutes.
e) Disconnect the hose from the lid of the container and from the hose air inlet of the
device.
ATTENTION!
To guarantee safe and ideal vacuum packaging, only use suitable accessories
and respect the manufacturer's instructions.
6. Cleaning and maintenance
6.1 Safety instructions for cleaning
o
Before performing cleaning or repairs, unplug the device and let it cool off.
o
Do not use caustic detergents and do not allow water to enter the unit.
o
To protect yourself against electric shocks, never place the device, the power cable
or the plug in water or other liquids.
ATTENTION!
The device is not suitable to be cleaned with a water jet. Therefore, spray water
without pressure to clean the unit!
6.2 Cleaning
o
Clean the device regularly.
o
Unplug the device before cleaning it.
o
Clean the surfaces of the equipment before and after use with a moist sponge and
neutral soap, or denatured alcohol, or a water and white vinegar solution.
o
Do not use aggressive detergents, solvents or aromatic essence-based
products!