Installation
36
Operating Instructions HYGROPHIL® H 4230-10 Serie A BA 030520
3.2
Mobile use
If the equipment is not to be installed for stationary use, you can fix it to the
stand holder type 4220-35 (see section 1.5.2 Accessories).
● Place the unit on its front side.
● Unscrew the two mounting struts from the rear panel of the equipment.
● Screw the stand/wall mount firmly to the rear panel of the enclosure using
the four M 5 x 12 hexagonal socket-head screws that are supplied
together with the stand/wall mount. Do not use the countersunk head
screws of the mounting struts for this.
● Select a solid, vibration-free, horizontal and flat location for setting up the
equipment.
● Align the equipment using a spirit level.
● Make sure that the equipment cannot fall over!
Attention:
The equipment must be fixed securely even for mobile use. The equipment
must never be operated without being fixed. It would otherwise be in danger
of falling over!
