7
1
2
3
4
Start menu
The start menu is used to quickly and simply set the three requisite basic settings;
it is only shown the irst time the thermostat is switched on (or if the thermostat is
fully reset using the reset function). Begin by choosing a language, continue with
the date and time setting, and inish of by setting operation mode and sensor.
The headings in grey are the menu name used in the thermostat.
Language setting
LANGUAGE
You can choose between several languages; the factory setting is English.
Set the required language by scrolling through them using the
or
button and conirm with
.
Date & time
DATE/TIME
The time and date must be set in order for the program functions to work
correctly. The thermostat automatically sets the day of the week and
summer and winter time (this function can later be switched of later if so
desired).
The value that is blinking can be decreased or increased using the
or
button; when the required setting is made, conirm it with
and the next
value will start to blink. Repeat this procedure until all the values are set. Start
by setting the applicable date, month and year. Then set hours and minutes.
Operation mode
OPERATION MODE
There a four operation modes:
HEATING
,
COOLING
,
INDUSTRY
or
MAX/MIN
. The
operation mode can only be selected in the start menu and cannot be
changed after this menu is left.
The settings for heating and cooling are for regulating the temperature in
home, oice and storeroom environments or similar. The industry mode is
used for controlling industrial processes and high temperatures or to safe-
guard sensitive installations against frost damage. Max/Min is used above
all to keep roof and ground surfaces free of snow and ice.
Set the required operation mode by scrolling through them using the
or
button and conirm with
. When you have selected the mode that
best suits your needs, conigure the sensors for your installation. Read more
about sensor settings under the section for the operation mode you have
selected.
Exit the start menu
EXIT
When you have made all the settings, press
EXIT
to leave the start menu; by
pressing
YES
you come directly to
DISPLAY MODE
, which is the "normal" mode
for the thermostat.
INTRODUCTION