30
Example: You want snow melting to be deactivated between 22:00 and 04:00 and
between 11:00 and 15:00 every day, i.e. the installation shall be active between
04:00–11:00 and 15:00–22:00. First select
WEEK
and then
2 EVENTS
. The irst event
is
ON
at 04:00 and
OFF
at 11:00. The second event is
ON
at 15:00 and
OFF
at 22:00.
RESET
There is also a reset function, which resets the program to the factory setting,
Max +2°C and Min -10°C, and deletes all the set events.
System setting menu
SYSTEM
Under system settings, you will ind settings for, for example, language and date,
as well as resetting functions for the time counter and for complete resetting to
factory settings. The system settings are under
SYSTEM
in the
MAIN MENU
.
Language
LANGUAGE
You can choose between several languages; the factory setting is English.
Set the required language by scrolling through them using the
or
button
and conirm with
.
You can also use the shortcut in the display mode (press
for three seconds).
Then go directly to the language menu. A practical function if you, by mistake, set
the wrong language and then have diiculty inding the language menu again.
Date and time
DATE/TIME
A set time and date can be changed if needed, for example, if the electrical supply
to the thermostat was disrupted for a period of more than ifty hours. The setting
function then comes up automatically.
The date and time setting is in the
MAIN MENU
under
SYSTEM
and
DATE/TIME
. Change
the value that blinks with either
or
and conirm with
.
Summer and winter time
S/W TIME
The thermostat calendar and clock are automatically set to summer and winter
time but the function can, if it is not required, be switched of.
Summer and winter settings are in the
MAIN MENU
under
SYSTEM
; select
S/W TIME
.
Switch of the function under
ON/OFF
in the menu and select
OFF
, a message is
shown for a short time conirming that the function is switched of. Activate the
function in the opposite way by selecting
ON
.
Sensor settings
SENSOR
The sensor settings are in the
SYSTEM MENU
under
SENSOR
, and there select
the sensor you want to use by browsing with
or
and conirm with
.