19
ACTIVATE
The program is started with
ACTIVATE
, and from there you can choose to use
TIMER
SETTING
. If you want to start the program without the timer function, select
NO
and
the program will then be active until another program is started. If you select
YES
,
the program will remain active for the selected time and will then return to the
previously used program.
The irst time the program is used, the time and temperature must be set
under
CHANGE
. All the settings are saved in the memory and are not lost even
if a power cut occurs, but, in this case, the clock must be reset to obtain normal
functionality again.
CHANGE
To make changes to the settings, select
CHANGE
;
TEMP
is used to set the tempera-
ture you want the thermostat to maintain when the program is activated,
TIMER
is
used to reset the current start and stop times;
REMOTE
is used to activate remote
control if applicable.
RESET
There is also a reset function, which resets the program to the factory setting,
+27°C, and deletes all the time settings.
REMOTE CONTROL
The holiday program can be controlled via a remote control unit. The unit is con-
nected to the applicable terminal block; see the wiring diagram. The holiday
program is activated when the remote control input is closed, and is deactivated
when it is opened again. The thermostat then returns to its previous setting.
Personal program
PERSONAL
Manual setting of the program allows optimisation of energy consumption to suit
just your needs by making settings for four events each day:
WAKE
,
AWAY
,
HOME
and
NIGHT
. There are three menu alternatives to choose between:
ACTIVATE
,
CHANGE
and
RESET
.
The personal program
PERSONAL
is under
PROGRAM
in the
MAIN MENU
. The tempera-
ture can be set b5°C and +45°C; the factory setting is +22°C.
ACTIVATE
The program is started with
ACTIVATE
and it remains active until another program
is started. The irst time the program is used, the time and temperature must be
set under
CHANGE
. All the settings are saved in the memory and are not lost even
if a power cut occurs for a period longer than two days, but, in this case, the clock
must be reset to obtain normal functionality again.
CHANGE
To set your personal program, go in under
CHANGE
. There are diferent ways of
setting the various events; you can choose to program day by day, weekend