6
This button moves you
down in the menus or
reduces values.
This button opens
a new menu or
conirms a change.
This button moves
you up in the menus
or increases values.
MARKER
MENU SELECTION
MENU NAME
MARKED
SUBMENUS
BLINK
Menu navigation
The functions in the thermostat are arranged in a system of menus and sub menus.
The Main menu always contains three submenus
TEMP
,
PROGRAM
and
SYSTEM
.
There are further choices under these.
The irst time the thermostat is started, a number of requisite values must be set
in the START menu (see page 7). The START menu is then not shown again: the
thermostat always opens in display mode (see page 8).
The thermostat has two modes for background lighting, full and half strength.
If no buttons are pressed for 30 seconds, the background lighting reverts to half
strength. By pressing one of the three buttons, you can change to full strength;
the thermostat remains in display mode.
The menus are reached by pressing
a second time in display mode.
The top row is always the name of the menu you are in. Use
or
to move the
round marker; the marked line you are on blinks. Press
to select the marked
alternative. At the bottom of each menu there is an
EXIT
, which returns you to the
previous menu.
To reset the thermostat to factory settings, use the
RESET
function, which you can
read more about on page 15.
INTRODUCTION