27
Reset
RESET
There are three choices under the reset menu:
CONN TIME
,
OP MODE
and
FAC SET
.
The
RESET
menu is under
SYSTEM
in the
MAIN MENU
.
Reset connection time
CONN TIME
The connection time is shown in hours; as with a vehicle trip meter, it shows the
number of hours an installation has been connected for since it was last reset. This
is beneicial if you want to calculate the energy consumption for a certain period.
The thermostat also has a counter that cannot be reset, which shows the total
hours the installation has been connected for.
To see the total and momentary connection times, press when the thermostat is
in display mode.
The reset function is in the
SYSTEM
menu under
RESET
; from here, select
CONN TIME
.
This is preset to
NO
and is changed to
YES
by pressing
and conirming with
.
Reset the operation mode settings
OP MODE
Settings can be reset in
OP MODE INDUSTRY
. All programs are reset and the
temperature and sensor settings return to the output values. Resetting does not
afect the choice of
OP MODE
,
LANGUAGE
or setting for
DATE/TIME
.
The reset function is in the
SYSTEM
menu under
RESET
, and there select
CONN TIME
.
This is preset to
NO
and is changed to
YES
by pressing
and conirming with
.
Reset factory settings
FAC SET
The thermostat can be entirely reset to factory settings. All programmed data is
deleted and the start up menu is opened. If you choose to reset the thermostat,
it is important to know the operation mode it uses and the coniguration of the
sensors.
The only way to change operation mode is to reset to the factory settings.
The reset function is in the
SYSTEM MENU
under
RESET
; from here select
FACTORY
SETTINGS
. This is preset to
NO
and is changed to
YES
by pressing
and conirming
with
.