10
Operation mode Heating
Heating mode is used in homes, oices, storerooms and such like. With
this operation mode, you can regulate the heating within a temperature
range of +5°C to +45°C. The thermostat can be used as a loor thermostat,
room thermostat or room thermostat with over heating protection for
wood loors. The energy saving program is primarily adapted for home
and oice environments, but can also be used for regulating heating
levels in, for example, storerooms.
Main menu
MAIN MENU
MAIN MENU
contains three submenus:
TEMP
,
PROGRAM
,
SYSTEM
and
EXIT
, which re-
turns you to display mode.
Temperature menu
TEMP
The temperature menu contains the functions that in some way concern direct
temperature regulation. This is where the set point and, if applicable, over heating
protection are set. The temperature menu is reached via
TEMP
in the
MAIN MENU
.
Set point
TEMP
The set point setting is under
TEMP
in the temperature menu. Set the required
temperature by pressing
or
and conirm by pressing
. The set point can
be set to an accuracy of 0.5 degrees within the range +5°C to +45°C; it is preset
to +22°C.
Over heating protection
OH PROTECTION
Over heating protection works as a loor temperature limiter; if you have a wood
or laminate loor, you must always use a room sensor with over heating protection
to ensure that the loor material is safeguarded against over heating and damage.
Over heating protection is under
OH PROTECTION
under
TEMP
. The limitation can be
set b5°C and +45°C. The factory setting is +35°C, which gives a surface
temperature of about +27°C.
TEMP
TEMP
OH
PROTECTION
EXIT
PROGRAM
MANUAL
HOME
OFFICE
HOLIDAY
PERSONAL
EXIT
SYSTEM
LANGUAGE
DATE/TIME
S/W TIME
SENSOR
RESET
EXIT
EXIT
DISPLAY MODE
M
AIN MENU
ADAPTIVE
VENT