Baroness LM551B, Owner'S Operating Manual

Page: 63 / 172

Reel Rotation Switch
Caution
Set the reel rotation switch to the "Rotation"
position immediately before starting cutting
work. At all other times, be sure to leave the
reel rotation switch set to the "Stop" position.
The reel rotation switch is located in the
operation panel and operates rotation of the
reel cutters (cutting cylinders) of the mower
units.
When the reel rotation switch is set to the
"Rotation" position, the reel cutters (cutting
cylinders) of all mower units will rotate for
cutting work. When the reel rotation switch is
set to the "Stop" position, the reel cutters
(cutting cylinders) will stop.
Note:
When the mower units are raised, the reel
cutters (cutting cylinders) do not rotate, even if
the switch is set to the "Rotation" position.
1
A
B
mh4pyw-021
Reel Rotation Switch_001
1 Reel rotation switch
A Rotation
B Stop
Reel Forward/Reverse Switch
Important
Do not switch between
“
Forward
”
and
“
Reverse
”
while the reel cutter (cutting
cylinder) is rotating.
Otherwise, the hydraulic system will
malfunction.
Important
If the reel rotation switch is not set to the
"Rotation" position, the reel cutter (cutting
cylinder) will not rotate.
The reel forward/reverse switch is located
inside the underseat cover and switches the
rotation direction of the reel cutters (cutting
cylinders).
When the reel forward/reverse switch is set to
the "Forward" position, the reel cutters (cutting
cylinders) of all mower units will rotate for
cutting work. When the reel forward/reverse
switch is set to the "Reverse" position, the reel
cutters (cutting cylinders) will rotate in reverse
(back lapping rotation).
ON
OFF
LAPPING
A
B
1
uy5vc2-001
Reel Forward/Reverse Switch_001
1 Reel forward/reverse switch
A Forward
B Reverse
Handling Instructions
LM551B
Handling Instructions
Page 4-33
Operation Method