Baroness LM551B, Owner'S Operating Manual

Page: 126 / 172

Manual Regeneration
Danger Danger
Since it will become extremely hot around the
exhaust outlet during DPF regeneration, do
not perform the regeneration in a location
where fires may occur.
Important
When the system enters the level where DPF
regeneration is required, perform the
regeneration immediately.
Interrupting the regeneration or ignoring the
warning and continuing traveling or cutting
work may cause the engine and DPF to
malfunction.
Important
Manual regeneration can not be performed as
long as the DPF auto regeneration inhibit
switch set to the "Auto regeneration inhibit
mode".
Set it to the "Auto regeneration mode" to
perform regeneration.
Manual regeneration is the DPF regeneration
performed only by the expert with the fault
diagnostic tool. Normal automatic
regeneration or parked regeneration can not
complete regeneration since large amount of
PM accumulates.
Manual regeneration can be activated in any
PM accumulation level.
You can not continue to use this machine
for traveling and cutting work during DPF
regeneration.
You can not perform the regeneration. (The
fault diagnostic tool is required.)
Manual regeneration is activated in PM
accumulation "Level 4".
Manual regeneration is activated in any PM
accumulation level when the following
condition met.
when replacing DPF
when replacing ECU
･
･
･
･
1.
2.
■
In PM accumulation "Level 4":
Important
If ignoring the manual regeneration
requirement and continuing traveling or cutting
work in PM accumulation "Level 4", PM
accumulation level enters "Level 5".
If still continuing traveling or cutting work, fatal
trouble will occur on the engine and DPF.
These are the statuses in PM accumulation
"Level 4".
"Excessive PM4" appears in the monitor
display.
Pressing an arrow key changes the
display to "CORRECTIVE ACTION: Stop
engine!! Contact dealer immediately".
The LED (yellow) lights up.
The engine output is limited at 50%.
1 of 2
<
NEXT
> HIDE
FMI 16
E x c e s s i v e P M 4
SPN 3701
C : 1
1 of 2
<
NEXT
>
HIDE
FMI 16
C O R R E C T I V E A C T I O N :
S t o p e n g i n e ! ! C o n t a c t
d e a l e r i m m e d i a t e l y
SPN 3701
C : 1
1
1
2
2
27gtuu-005
Manual Regeneration_001
1 LED (yellow)
2 Arrow key
Stop traveling and cutting work.
Park this machine in a safe location.
Apply the parking brake.
Stop the engine.
1.
･
･
･
2.
3.
4.
5.
LM551B
Maintenance
Page 5-12
DPF