Baroness LM551B, Owner'S Operating Manual

Page: 55 / 172

Engine Overload Warning Buzzer
If the traveling pedal is depressed and the
speed exceeds 12.0 km/h while the pedal
stopper is in the "Traveling" position and the
reel cutters (cutting cylinders) are rotating, a
buzzer will sound. (intermittent tone)
Warning Buzzer for Traveling With Brake
Applied
If the traveling pedal is depressed while the
parking brake is applied, a buzzer will sound.
(continuous tone)
Warning Buzzer
There are two warning buzzers, which
indicate four warnings.
Warning buzzer 1 & 2
Warning buzzer 3 & 4
Overheat Warning Buzzer
If the water temperature inside the engine
exceeds 110 degrees Celsius, a buzzer will
sound. (intermittent tone)
When the buzzer sounds, stop the engine
immediately, and then inspect the machine
and perform any necessary maintenance.
Hydraulic Oil Level Warning Buzzer
If the oil level in the hydraulic tank
decreases by approximately 3.0 dm
3
(3.0 L)
from the specified level, a buzzer will
sound. (continuous tone)
When the buzzer sounds, stop the engine
immediately, and then inspect the machine
and perform any necessary maintenance.
Engine Overload Warning Buzzer
If the traveling pedal is depressed and the
speed exceeds 12.0 km/h while the pedal
stopper is in the "Traveling" position and
the reel cutters (cutting cylinders) are
rotating, a buzzer will sound. (intermittent
tone)
When the buzzer sounds, stop the engine
immediately and set the pedal stopper to
the "Working" position.
Warning Buzzer for Traveling With Brake
Applied
If the traveling pedal is depressed while the
brake pedal is locked with the locking
pedal, a buzzer will sound. (continuous
tone)
When the buzzer sounds, firmly depress
the brake pedal to release the locking
pedal.
3.
4.
･
･
1.
2.
3.
4.
Operation Method
Cautions for when You Leave The
Machine
Caution
If the brakes are not sufficiently effective, use
the wheel stoppers to secure the machine.
Caution
Never park the machine on a slope.
Park the machine on level ground.
Apply the parking brake.
Stop the engine.
Remove the ignition key.
Leave the machine.
Positions of Operation Decals
6
5
4
1
2
3
6n6oux-201
Positions of Operation Decals_001
10
9
7
8
12
11
6n6oux-151
Positions of Operation Decals_002
1.
2.
3.
4.
5.
Handling Instructions
LM551B
Handling Instructions
Page 4-25
Operation Method