Baroness LM551B, Owner'S Operating Manual

Page: 123 / 172

Automatic regeneration is activated only
when the auto regeneration inhibit switch
set to the "Auto regeneration mode".
Automatic regeneration is activated when
PM accumulation level is "Level 1" or "Level
2".
However, it may be activated in "Level 0"
depending on the other condition.
Important
If the regeneration remains uncompleted even
after 30 minutes have passed since the start
of automatic regeneration in PM accumulation
"Level 1", PM accumulation level enters
"Level 2".
These are the procedures of automatic
regeneration.
■
When the DPF auto regeneration inhibit
switch set to the "Auto regeneration mode":
When the conditions for automatic
regeneration are met, the automatic
regeneration starts with the regeneration
icon lighting.
Set the engine rotation speed to 2,200 rpm
or more.
When the regeneration completed, the
regeneration icon disappears.
1
65 C 55 %
2400 RPM 100 %
% SOOT ENG RPM
FUEL LEVEL COOL TEMP
xlfvcz-004
Automatic Regeneration_001
1 Regeneration icon
■
When the DPF auto regeneration inhibit
switch set to the "Auto regeneration inhibit
mode":
When PM accumulation level enters "Level
1" or "Level 2", the blinking regeneration
icon appears.
Set the DPF auto regeneration inhibit
switch to the "Auto regeneration mode".
･
･
1.
2.
3.
1.
2.
When the conditions for automatic
regeneration are met, the automatic
regeneration starts and the regeneration
icon changes from blinking to lighting.
Set the engine rotation speed to 2,200 rpm
or more.
When the regeneration completed, the
regeneration icon disappears.
65 C 40 %
2400 RPM 100 %
% SOOT ENG RPM
FUEL LEVEL COOL TEMP
1
27gtuu-008
Automatic Regeneration_002
1 Regeneration icon
3.
4.
5.
Maintenance
LM551B
Maintenance
Page 5-9
DPF