Baroness GM1700, Service Manual

Page: 25 / 192

Greasing
About Greasing
Since there may be adhesion or damage due
to lack of grease on moving parts, they must
be greased.
Add urea-based No. 2 grease in accordance
with the Maintenance Schedule.
Other locations where the specified grease or
lubricant is used are indicated in "Greasing
Points".
Add grease using the specified grease or
lubricant.
Main body
Greasing Points
Grease nipples are installed in the following
locations.
Add grease every 50 hours of operation.
1
2
3
4
5
6 7,8
11
10
9
8bq62b-205
Greasing Points_001
￭
Location
No. of
Greasing
Points
1 Pivot 3
2 Knife rotation lever fulcrum 1
3 Brake pedal shaft fulcrum 1
4 Chain wheel mounting shaft fulcrum 2
5 Traveling pedal shaft fulcrum 2
6 Brake lever shaft 2
7 Joint fulcrum 2
8 Joint connector 1
9 Tension shaft fulcrum 1
10 Cam lever shaft fulcrum 1
11 Seat mounting bracket 1
Pivot
Jack up the machine and apply grease.
Middle between the front wheels
8bq62b-129
Greasing Points_002
Front right wheel
8bq62b-130
Greasing Points_003
1.
Maintenance standards and maintenance
GM1700
Maintenance standards and maintenance
Page 3-13
Greasing