Insert the round head pin through the
holes in the cylinder lock, and then install
the cotter pin to secure the cylinder lock.
2
1
3
xsi3tb-002
Raising and Lowering The Bucket_002
1
Cotter pin
2
Round head pin
3
Cylinder lock
Also on the opposite side, lower the
cylinder lock and secure it.
Procedure for lowering the bucket
Remove the cotter pin and round head
pin.
Raise the cylinder lock.
Attach the cotter pin and round head pin to
secure the cylinder lock.
Also on the opposite side, raise the
cylinder lock and secure it.
Make sure that the parking brake is
applied.
Start the engine.
Shift the bucket up/down lever to the
"DOWN" position to lower the bucket.
Release the lever after the bucket lowers
to its lowest position and stops.
Stop the engine.
Return the outriggers to the position "For
traveling and collecting."
Removing and Installing The Brush Cover
Procedure for removing the brush cover
Move the machine to level ground.
Apply the parking brake.
Raise the bucket to its highest position.
Stop the engine.
Warning
To keep the position of raised bucket, be sure
to lock it with the cylinder lock.
[10]
[11]
2.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
1.
[1]
[2]
[3]
[4]
Lock the bucket with the cylinder lock.
Disengage the left and right slide latches.
1
xsi3tb-003
Removing and Installing The Brush Cover_001
1
Slide latch
Remove the brush cover.
1
xsi3tb-004
Removing and Installing The Brush Cover_002
1
Brush cover
Procedure for installing the brush cover
Install the brush cover and secure it with
the left and right slide latches.
Release the cylinder lock.
Make sure that the parking brake is
applied.
Start the engine.
Lower the bucket to its lowest position.
Stop the engine.
[5]
[6]
[7]
2.
[1]
[2]
[3]
[4]
[5]
[6]
FS900
Handling Instructions
Page 5-4
Operations Before Service
