Electrical Wiring
Inspection of Electrical Wiring
Important
Electrical short circuit will cause fire, electrical
leakage and malfunction of electrical
equipments.
Inspect electrical wiring. If necessary, repair
before operating the machine.
Make sure that there is no defacement in
wires and terminals.
Make sure that there is no deterioration or
damage in wires and terminals.
Make sure that there is no looseness in
wiring connections.
Make sure that there is no poor terminal
connection.
Tire
Inspection of Tires
Make sure that there are no cracks,
damage or abnormal wear.
Check the pneumatic pressure of the tires.
Type: Rubber tires
Tire size
Pneumatic pressure
Front
wheel
18 x 9.50 - 8
80 kPa (0.8
kgf/
㎝
2
)
12 psi
Rear
wheel
20 x 10.00 -
10
150 kPa (1.5
kgf/
㎝
2
)
22 psi
Brake
Inspection of Brake
When depressing the brake pedal fully,
make sure that there is appropriate
clearance between the floorboard and the
pedal or pedal reserve distance.
When depressing the brake pedal fully,
make sure that the pedal reaction is not
spongy and that there is no noise.
When depressing the brake pedal during
traveling, make sure that the machine stops
smoothly and the braking is sufficiently
effective.
1.
2.
3.
4.
1.
2.
1.
2.
3.
Inspection of Parking Brake
Depress the locking pedal while firmly
depressing the brake pedal to lock it and
check that the brake is applied effectively.
Firmly depress the brake pedal and release
the locking pedal to release the brake
pedal, and then check that the brake is not
applied.
Belt
Inspection of Belts
Warning
Be sure to stop the engine before inspecting
the belts.
Warning
If you have removed any covers, etc., during
inspection, make sure that you securely re-
attach them in their original positions.
If covers, etc., remain removed, the operator
may come into contact with rotating parts or
belts, and foreign objects may fly off, possibly
resulting in injuries.
Press the middle of the belt with your finger
to check the belt tension.
Make sure that there are no cracks,
damage or abnormal wear.
Wire
Inspection of Wire
Inspect wires. If necessary, adjust or replace
wires.
Make sure that the wire is not cracked or
damaged.
If the wire is cracked or damaged, replace it
with a new one immediately.
Safety Device
Inspection of Safety Device
Make sure that the safety device operates
correctly.
"Safety Mechanisms" (Page 4-8)
Repair the machine before operation
whenever there is any abnormality.
1.
2.
1.
2.
1.
2.
Handling Instructions
FS900
Handling Instructions
Page 5-11
Inspection and Cleaning
