Hour Meter
The hour meter indicates the accumulated
operation time of the engine.
The number in red figures on a white
background is incremented every thirty-six
seconds.
The number in white figures on a black
background is incremented every hour.
1/100 wheel
…
red figures on a white
background
Hour wheel
…
white figures on a black
background
2
1
uknn6v-007
Hour Meter_001
1
1/100 wheel
2
Hour wheel
Angle Meter
The angle meter is located in the operation
panel.
This instrument indicates the angle of the
machine position.
1
al3bhj-001
Angle Meter_001
1
Angle meter
Safety Mechanisms
This machine features a safety device for
starting/stopping the engine.
As for starting the engine, the safety device
prevents the engine from starting unless it
meets each of the following three conditions.
An operator is sitting on the seat.
The parking brake is applied.
The traveling pedal is set to the neutral
position.
In the event the operator leaves the seat with
the engine running, the safety device will be
activated and will stop the engine under any
of the following conditions:
The operator leaves the seat without
applying the parking brake.
The traveling pedal is operated after the
parking brake is applied and the operator
leaves the seat.
Warning Mechanisms
Bucket Buzzer
Warning
When the bucket buzzer sounds and the
bucket FULL lamp is turned on, immediately
stop collecting work and discharge the
collected materials in the bucket.
If the collected amount in the bucket exceeds
the defined amount, the machine may fall
down when the bucket raised.
Warning
Always set the bucket buzzer switch to the
"ON" side.
The bucket buzzer does not sound if the
bucket buzzer switch set to the "OFF" side.
When the collected amount reaches the
defined amount with the bucket buzzer switch
set to the "ON" position, the buzzer sounds
(intermittent sound).
When the bucket buzzer sounds, immediately
discharge the collected materials in the bucket.
1.
･
･
･
2.
･
･
FS900
Description of Functions
Page 4-8
Angle Meter
