Specified Hydraulic Oil
Shell Tellus S2M46
ISO Viscosity Grade
ISO VG46
Density
15 °C (59 °F)
0.873 g/cm
3
(0.0315 lb/in
3
)
API Gravity
30.6
Flash Point (Open Cup)
230 °C (446 °F)
Pour Point
-30 °C (-22 °F)
Kinematic
Viscosity
40 °C (104 °F)
46 mm
2
/s (46 cSt)
100 °C (212 °F)
7 mm
2
/s (7 cSt)
Viscosity Index
109
Remove the knobs, and then open the front
cover.
1
2
2
dmhzyz-001
Hydraulic Oil Supply_001
1
Knobs
2
Front cover
Remove the bolts, and then open the cover.
2
1
dmhzyz-002
Hydraulic Oil Supply_002
1
Bolt
2
Cover
If the hydraulic oil level is low, follow the
steps below to supply oil.
Open the tank cap, and then supply
hydraulic oil through the oil filling port
until the oil level reaches the middle of
the oil gauge on the hydraulic tank.
1.
2.
3.
[1]
Tighten the tank cap securely.
1
dmhzyz-003
Hydraulic Oil Supply_003
1
Tank cap
Start the engine, raise and lower the brush
frame and the bucket, and then drive the
machine forward and in reverse repeatedly
several times.
On a level surface, lower the brush frame
and the bucket and maintain that position,
and then check to see if the oil level is at
the middle of the oil gauge. If necessary,
supply oil.
Check underneath the machine for oil
leakage.
Install the cover.
Close the front cover.
[2]
4.
5.
6.
7.
8.
Handling Instructions
FS900
Handling Instructions
Page 5-7
Inspection and Cleaning
